Internova™ Yeti 800 Help

Thank you for purchasing the Yeti 800TM! We have designed it to be incredibly bright, long lasting, and simple to use. Please follow the instructions below to get the most out of your lantern and should you ever have any questions at all, please don't hesitate to contact us at care@intervine.com.

Battery Installation
1) Remove the rubberized base cap on the bottom by rotat­ing it counterclockwise and pulling it out.
2) Install 4 D size batteries making sure that the positive and negative ends are inserted correctly as indicated on the lan­tern.
3) Replace the rubberized base cap by aligning the guide post to the corresponding slot on the battery compartment, sliding the post into the slot, and then twisting the base cap clockwise while pushing down to lock into place.

Lantern Operation
The Yeti 800 TM comes with one power button that is used to power the lantern on/off as well as cycle through all avail­able modes.

Powering On
To turn on the Yeti 800 TM, simply press and release the round button in the middle of the lantern.

Cycling Through All Modes
Once on, pressing the power button again will allow you to cycle through each of the lantern's modes:
- High
- Medium High
- Medium
- Low

Powering Off
Alter you have cycled through each mode, you can turn the lantern off by pressing the power button again.

Questions?
Should you have any problems or questions, please feel free to check out our helpful videos and tips at

www.intervine.com/help. You can also reach us directly at care@intervine.com and we will help take care of your prob­lems as quickly as possible!